Bespoke Joinery Hardwood Oak

Supplying high quality oak for joinery is one of Timberpride’s areas of expertise; it’s vital that joiners, cabinet makers and carpenters can obtain accurately machined and ready-to-use timber in the right sizes. Timberpride machines its oak in-house and can supply both air dried and kiln dried joinery hardwood, cut-to-size and machined to suit your requirements.

If you need your oak supplied PAR (planed all round), Waney edge or square - Timberpride can supply it in the sizes or the form you need.

Timberpride hold plentiful stocks and understand the importance of graded timber and consistency throughout the batch. Timberpride has spent many years establishing and nurturing strong supplier relationships with French saw mills to ensure continuity of supply across all grades. All oak is carefully inspected on a board-by-board basis and each board is chosen to best suit your requirements and minimise waste.

Timberpride’s attention to detail helps its clients to save significant time and money. The company’s industry knowledge, helpful pragmatic advice and outstanding customer service are endorsed by its high customer retention rates.

Timberpride buy in logs and joinery hardwood oak in-house to supply;

• Square edge oak
• Planed hardwood (PAR)
• Fully cut out
• Long lengths available
• Individually labelled pieces (cutting list)
• Waney edge timber
• Cabinet makers can select their timber
• Consistent quality & grades

Grade QB1 Joinery Hardwood Oak held in stock

Size	Length	Drying
27mm	4.0m - 6.2m	Kiln dried to 8-10%mc
34mm	4.0m - 6.2m	Kiln dried to 8-10%mc
41mm	4.0m - 6.2m	Kiln dried to 8-10%mc
54mm	4.0m - 6.2m	Kiln dried to 8-10%mc
65mm	4.0m - 6.2m	Kiln dried to 8-10%mc
80mm	4.0m - 6.2m	Kiln dried to 8-10%mc
100mm	2.5m - 6.2m	Air dried min 4 years to approx 18%mc
120mm	2.5m - 6.2m	Air dried min 4 years to approx 18%mc
150mm	2.5m - 6.2m	Air dried min 4 years to approx 18%mc